Novel hydrophilic N-halamine polymer with enhanced antibacterial activity synthesized by inverse emulsion polymerization

N-halamine-based antibacterial agents have high efficiency and rechargeable antibacterial properties. However, their applications are limited due to their complex synthetic process and fuzzy antibacterial mechanism. In this study, a novel N-halamine antibacterial polymer was synthesized by inverse emulsion polymerization and characterized by Fourier transform infrared, nuclear magnetic resonance, scanning electron microscopy, thermogravimetric analysis, and X-ray photoelectron spectroscopy. Due to the difficulty of purification, most of the subjects studied previously were hydrophobic polymers, while little research on hydrophilic polymers. In this experiment, this difficulty was overcome by controlling the dosage of sodium hypochlorite and methods of dialysis. Because of the complex cell structure of Gram-negative bacteria, it is difficult for N-halamines to release the oxidizing chlorine into the cell. However, the hydrophilic N-halamines can solve this problem, which showed a stronger antibacterial effect on Gram-negative Escherichia coli synthesized in this study. In addition, the particle size and hydrophilic property of the polymer were changed by changing the amount of initiator, and the differences in their antibacterial properties were studied. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47419.     

Modeling and analysis for multilayered complex communication network of satellite navigation system

This study is extended to construct the network model, the node model, and the link model of complex communication network for satellite navigation system (CCN‐SNS) based on the hierarchical architecture. Firstly, a method called snapshots was proposed to describe the dynamic topology for CCN‐SNS; secondly, another method was put forward to model the different nodes of the CCN‐SNS; thirdly, the different links between every two different nodes were modeled. Therefore, based on the OPNET tools, a simulation for the CCN‐SNS, which contains the models that proposed earlier used to analyze the navigation accuracy and network transmission performance, was performed.     

重力注水过程流动不稳定现象关键影响因素研究

重力驱动注水过程中由于流量较小以及蒸汽的积聚可能导致流动不稳定现象的发生，对核反应堆安全运行具有重要的影响。通过实验研究的方法，搭建了重力注水模拟实验装置，研究了不同蒸汽出口形阻、高位储水箱水位和加热棒初始温度下流动不稳定现象的变化规律。结果表明，重力驱动注水过程流动不稳定现象包含冷却水初次注入阶段、注入水逐出阶段和冷却水再注入阶段等。在一定冷却水初始温度、冷却水入口形阻以及系统压力下，蒸汽排出速度以及实验本体内筒顶部的聚集情况取决于蒸汽出口形阻，减小蒸汽出口形阻可加快蒸汽排放速度，压力峰峰值降低、振荡周期变长，有利于系统稳定；提高高位储水箱水位加快了冷却水注入速率，增加了加热棒被淹没率，降低了流动不稳定现象的发生次数和持续时间；随加热棒初始温度的升高，冷却水流量出现了波动向停滞的转变，流动不稳定现象发生的次数增加且持续时间加长。     

面向任务口语理解研究现状综述

口语理解是对话系统重要的功能模块，语义槽填充和意图识别是面向任务口语理解的两个关键子任务。近年来，联合识别方法已经成为解决口语理解中语义槽填充和意图识别任务的主流方法，介绍两个任务由独立建模到联合建模的方法，重点介绍基于深度神经网络的语义槽填充和意图识别联合建模方法，并总结了目前存在的问题以及未来的发展趋势。     

R-DRA: a replication-based distributed randomized algorithm for data dissemination in connected vehicular networks

Wireless Networks - As data dissemination is of great importance for applications in connected vehicular networks (VANETs), we aim to facilitate the performance of data dissemination in this study....     

Propagation of surface cracks on beam blank in the mould during continuous casting

ABSTRACT

We focus on crack propagation to investigate surface cracks in the mould during continuous casting, based on the crack initiation mechanism proposed in previous studies. The temperature and stress data of a solidified shell were extracted, and an extended finite element model based on the continuous damage theory of elastic–plastic materials was developed to simulate surface crack propagation. The results showed that, in the cracked area, stress concentration occurred at the crack tip, and the element split open and the crack propagated when the maximum principal stress in the stress concentration area reached the critical value. Prefabricated cracks in the fillet and web mainly developed into longitudinal cracks in the mould. The theoretical mechanism of this study was found to be the same as the crack propagation mechanism observed during the actual production of beam blanks. Thus, this study reveals the theoretical principle of crack initiation and propagation and can provide theoretical guidance for controlling surface cracks during beam blank continuous casting.     

Effects of hydroxyl radical induced oxidation on water holding capacity and protein structure of jumbo squid (Dosidicus gigas) mantle

Protein oxidation is considered as an important issue in food preservation process. In the present study, the potential influence of protein oxidation on water holding capacity and protein structure of jumbo squid (Dosidicus gigas) mantle was investigated. After the hydroxyl radical oxidation, it was found that the carbonyl, surface hydrophobicity and dityrosine content of myofibrillar protein significantly increased (P < 0.05), while the content of total sulphydryl decreased significantly (P < 0.01). Meanwhile, the fluorescence intensity of squid was weakened, and the maximum absorption peak of fluorescence red shift as the H₂O₂ concentration increased. The sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) showed that not only the protein cross-linking but also degradation could have occurred. The content of α-helix decreased, the content of β-sheet, β-turn and the unordered structures increased after oxidation. In addition, oxidation resulted in a decrease in water holding capacity. Taken together, oxidation resulted in the damage of the myofibrillar structure, the increase in muscle loss rate and the decrease in water holding capacity.     

Revisiting the Parallel Strategy for DOACROSS Loops

Journal of Computer Science and Technology - DOACROSS loops are significant parts in many important scientific and engineering applications, which are generally exploited pipeline/wave-front...     

Microstructure and Wear Behaviors of Plasma-Sprayed FeCrNiMoCBSi Coating with Nano-Grain Dispersed Amorphous Phase in Reciprocating Sliding Contact

A novel FeCrNiMoCBSi amorphous/nanocrystalline coating was fabricated using a plasma spraying process. The coating was dense with a low porosity of approximately 0.99%. The coating consisted of a 67.8 vol% amorphous phase coupled with many nanocrystalline grains that were approximately 5?nm in diameter. The mechanical properties of the as-sprayed coating were determined by nanoindentation measurement, and the tribological behaviors were systematically investigated in a reciprocating sliding contact. The results show that FeCrNiMoCBSi coatings possess superior wear resistance compared to other typically similar Fe-based amorphous coatings. The tribological behaviors evolve with the combination of normal load and sliding velocity. Herein, the dominant wear mechanisms are delamination wear and oxidation wear. With an increase in normal load and sliding velocity, the abrasive wear is gradually weakened, the formation of oxide films on the worn surfaces is facilitated, and wear debris is ground to powder. The oxide films suffer from fatigue wear with induced cracks undergoing reciprocating sliding effects.